AN ISO 9001:2008 & ISO 14001:2004 & CE Certified Co.

CALL +91 8 50 60 70 80 8



  • Home
  • Bird Problem
  • Residential
  • Problem On Roof Top Parapets

Keep Pigeons Away from Parapet Walls

BirdScare Model BS-5N-V1

BirdScare Model BS-5N-V1 is most suitable for keeping pigeons away from surfaces with any kind of geometry. 

Designed to form endless chain. Chain gives us advantage of minimum drilling during installation. Once screw on each side and one or two in the middle (depending on length of chain) are enough to hold.

Unique feature of Chain Design is that every piece holds the adjacent one. This is very useful in case, when installed using adhesive. In case adhesion one piece becomes weak, adjacent ones will hold same in place.

Download PDF  |  Size: 1175.714 KB  

Buy From

Amazon flipkart snapdeal
ebay olex shopclues

PERFORMANCE: Proven to be effective against pigeons 

SAFE: Does not harm or hurt pigeons. Specially designed tip will never pierce, even if pigeon comes in  contact accidentally. 

Weather Proof: Can withstand extreme temperatures -20 degrees centigrade to + 100 degree centigrade

Easy to install: Check our "How to Install" section for easy installation process

Guarantee: 5 years shelf life

U V Stabilized: Made from Virgin UV stabilized polycarbonate engineering polymer - same material is used to make bullet proof glass

HELPS MAINTAINING HEALTH & HYGIENE: Pigeon poop is proven to transmit over 60 diseases, few of which are fatal

COST SAVING: Saves repeated cleaning cycles caused by frequent pigeon droppings

To see installation video, please click here.

It can be fixed using screws or by pasting using adhesive or double sided adhesive tape. We strongly recommend avoiding adhesive because adhesive may not stay for long. Reasons can be weak adhesive/ weak base (sandy or peeling paint)/ weather etc etc.

Make chain by joining multiple pieces of BirdScare Model BS-5N-V1 together, by using screws and nut (Size M3*6mm) equal to length of ledge. Screws and nuts will be provided with material on request (FOC)

Place the chain of BirdScare on the surface where perching of pigeons is to be stopped. Drill hole and fix using screws

Note: Around 10 mm of BirdScare BASE STRIP should protrude out of edge of surface where spikes are being fixed

For challenging locations, contact us for installation - +91 8506070808

Each strip consists of 20 specially designed tips

To see installation video, please click here.

Indolite BirdScare model BS-5N-V1 is completely made of Polycarbonate

Max Height of Spikes :   115 mm
Number of rows:  5 rows - with protection from all 4 sides.
Coverage on top:   175 mm
Base Width:   75 mm
Length: 335 mm (It has chain making option- can be extended to any length)
Colour:  Transparent

Kindly download PDF file for dimension drawing.

  • For 360 Degree view of Model BS5-N-V1


Enquiry Form